Code Wrangling at its Best
Part VI — The Complete Reference Design, Operating Guide, Troubleshooting Manual, and Resources Updated for the finalized NANO UPDI PROGRAMMER Rev. 1.0.0 hardware We began this series with one deceptively simple question: What is UPDI? Six parts later, the answer is considerably richer than: “It is Microchip’s one-wire programming interface.” UPDI is indeed a one-wire
Continue Reading “All You Ever Needed To Know About UPDI, And Then Some!”
Part V — Using UPDI as an On-Chip Debugger Updated for the finalized NANO UPDI PROGRAMMER Rev. 1.0.0 hardware So far, we have used only half of UPDI’s name. We have built the: Unified Program and Debug Interface into a functioning programmer. Now we turn to the second half: Unified Program and Debug Interface This
Continue Reading “All You Ever Needed To Know About UPDI, And Then Some!”
Part I — Foundations, Electrical Interface, Protocol, and High-Voltage Activation There was a time when connecting a programmer to an AVR microcontroller could consume a surprisingly large number of pins. Traditional AVR In-System Programming used SPI-like signaling. JTAG used four principal signaling wires plus reset and power references. debugWIRE reduced debugging to essentially one signal,
Continue Reading “All You Ever Needed To Know About UPDI, And Then Some!”
Recent Comments